Last year proved to be a successful one for Taurus USA, with the company showcasing its dedication to producing affordable and practical handguns with reliable quality control. Among the new offerings were the American-made TX22 rimfire pistol, lightweight versions of the Model 856 revolver, and the G3 9mm semi-auto.
Building on the success of the G series, the 4" barrel, double-stack G3 introduced an improved trigger system and a modified slide profile. This year, Taurus expands the G3 line with the sub-compact G3c. Manufactured in Brazil, the G3c is a polymer-frame, striker-fired semi-auto that employs a short recoil, locked-breech action. With a design clearly based on its predecessor, the G2c, this pistol offers a standard 9 mm 12+1 ammunition capacity.
Let's delve into an in-depth look at the Taurus G3c, focusing on its features, performance, and overall value.
Design and Features
With external dimensions comparable to those of the Glock G26, it's easy to find suitable holsters for comfortable concealment, like the DeSantis Inner Piece 2.0 inside-the-waistband holster. The carbon-steel slide is treated with a Tenifer finish, which has a proven history of scratch, wear and corrosion resistance.
The deep front cut outs of the G2 style slide have been replaced with a squared-off profile that allows for canted cocking serrations at the front and rear. This is a plus for those who prefer to manipulate the slide from the front end. The slide’s nose is beveled for easier re-holstering, while the back end is nicely rounded to match the contours of the frame.
Read also: Viking Card Inspiration for Taurus
The polymer sights have been replaced with an all-steel sight system. The white-dot front sight is paired with a serrated square notch rear sight, which dovetails into the slide so as to be drift-adjustable. Taurus recognizes that many concealed-carry practitioners are swapping out factory iron sights for fiber optics or night sights. The bore of the 3.2" long stainless steel barrel features traditional 6-groove rifling that allows for the use of cast lead bullets.
The top of the chamber has a witness hole that takes the place of the mechanical chamber indicator found on the G2c. It allows the state of the chamber to be verified without pressing open the action. The feed ramp is polished mirror-smooth for reliable feeding. The two-piece, dual spring recoil assembly uses all-steel supports instead of a mix of steel and polymer, like some models.
The slide rides on four short rails which project from steel front and rear support blocks that are secured to the frame with roll pins. The pistol's serial number can be found in no less than four locations. Another is located in a metal plate molded into the dust cover with the remaining two found on the barrel and slide next to the ejection port.
The external controls, including the takedown lever, slide stop, magazine release button and the thumb safety are all metallic instead of polymer. Like the slide, these controls now have an upgraded finish. They've been treated with black Teflon, which is not only corrosion-resistant but also increases lubricity for smoother control operations.
The left-side thumb safety lever has an unobtrusive low profile that won't dig into your hip when holstered. It swings up into the Safe position and down, exposing a red dot on the slide, to fire. The magazine release has a serrated surface for improved purchase and it can be reversed for left-handed operation. The dust cover sports a molded in 1.25" long, 1-slot MIL-STD-1913 accessory rail.
Read also: Decoding Taurus Male Tears
Just behind the rail are left and right side indentations (Taurus calls them Memory Pads) that act as touch points for the tip of the trigger finger when resting against the frame. The face of the trigger is grooved and flattened with a wide integrated safety lever. It has a light 2-lb. take up with a firm stop before breaking cleanly with 4-lbs. 10-oz. of trigger pull.
The trigger comes to rest against the frame and only needs about a quarter inch release in order to reset. The result is a trigger that feels tuned instead of factory installed with a short reset that aids in quick follow-up shots. This pistol's ignition system also provides second strike capability. This means that, should the firing pin strike a hard cartridge primer, the trigger can be pulled a second time to strike it again.
Taurus went out of its way with the G3 grip frame to make sure it would be a comfortable fit for a variety of hand shapes. At the top of the grip, on both sides, are ridged depressions that act as thumb rests. The G3 does not have interchangeable backstraps, but I still found the grip to be a comfortable size and shape for my somewhat smaller hands.
The touch points of the G3 grip are smooth, with the exception of six 1.50" tall, molded in textured panels to provide added purchase on all four sides. The texturing of these panels is aggressive, with rough-grit feel comparable to skateboard tape or sand paper, but it’s isolated to those points along the shooting hand palm and fingers where added control is most useful. The grip's back strap extends down behind the base plate of the blued steel, double-stack magazine.
This helps to protect the shooting hand from getting pinched during reloads and prevents the base plate from nibbling at the palm when the pistol recoils. This provides for a better grip on the base plate should the magazine need to be manually stripped out of the grip due to fouling or other malfunction. The base plate is also flared along the front edge to provide a rest for the little finger. This pistol's internal and external safeties include a manual safety lever, the trigger safety and a firing pin block. This model does not have a magazine safety.
Read also: Clinginess in Taurus Men Explained
This means the pistol will fire if the trigger is pulled with the magazine removed. Breaking down the G3c for routine cleaning follows a similar set of steps as other striker-fired pistols.
Disassembly process
- Start by removing the magazine
- Opening the action and verifying that the pistol is completely unloaded, and then closing the action.
- Retract the slide about 0.25" and then hold in that position while pulling down on the take down lever.
- Release the slide and then press the trigger.
The slide can now be pressed forward off of the frame.
Initial Quality and Handling
The production-grade G3 I worked with last year arrived in great shape. The overall fit and finish was top notch. The metal finishes were properly applied, the gun was clean inside and out and shipped without any of the scratches and blemishes that I've seen on some Taurus products in the past. The slide and frame were both well-made and free of machine or mold marks. The controls all worked smoothly and properly. Taurus has suffered from quality-control issues in the past, but I'm glad to report that the G3c was just as healthy of a specimen as the G3. In fact, both pistols exhibited the same clean, consistent 4-lbs. 10-oz. trigger pull.
Small 9 mm pistols like this one can produce snappy levels of felt recoil depending on the loads selected. The rounded, hand filling 3-finger grip and grip texturing makes this pistol more manageable than some.
Range Performance
At the shooting range, the G3c proved to be utterly reliable with all of the test ammunition fired, including practice-grade and premium defensive hollow point loads. The pistol was mechanically sound as well with the controls and all three magazines operating properly. The magazine release is well-positioned to be easy to reach and the magazines dropped free from the grip when the release was pressed.
Formal bench rested accuracy testing was conducted at 15 yards by firing five 5-shot groups using the pistol’s factory installed iron sights. Bullet velocity was measured for 10 rounds fired next to a LabRadar chronograph.
Here are the results:
This Should Have Been The First Gun I Ever Shot - Taurus G3C First Mag Review
| Ammunition | Average Velocity (fps) | Best Group (inches) | Group Average (inches) |
|---|---|---|---|
| Federal American Eagle 115-gr. total synthetic jacket | 1,083 | 3.38 | 3.50 |
| SIG Sauer 365 V-Crown 115-gr. jacketed hollow point | 1,084 | 3.39 | 3.47 |
| Steinel Ammunition’s Subsonic Carry 124-gr. solid copper hollow point | 1,003 | N/A | N/A |
Upgrades and Value
With the release of the new Taurus G3c, I was hoping to see the same level of commitment to consistent quality control, reliability and value that I found in the G3. But Taurus insisted on one-upping themselves by giving the slide a Tenifer finish, weatherproofing the controls and configuring the sight system to accept readily available Glock-type upgrades.
The factory trigger feels like an upgrade as well, thanks to its light take-up and short reset. The defensive accuracy is where it needs to be with group averages hovering around 3.5" at 15-yards. With these upgrades and a suggested retail price of $305.74, the G3c is well-positioned to compete with popular concealed carry 9 mm pistols that cost more while maintaining a budget friendly price point to fit most budgets. Currently shipping in an all-black finish, this pistol will be available in additional color options along with 15 and 17-round magazines.
Specifications
- Manufacturer: Taurus USA
- Model: G3c
- Action: Short Recoil, Locked-Breech Semi-Auto, Striker Fired
- Caliber: 9 mm
- Slide: Matte Black Tenifer Treated Carbon Steel
- Cocking Serrations: Front and Rear
- Front Sight: Metallic White Dot
- Rear Sight: Metallic Serrated Square Notch, Drift Adjustable Rear
- Barrel: 3.2" Stainless Steel, Polished Feed Ramp
- Frame: Matte Black Polymer
- Controls: Metallic with Black Teflon Finish
- Accessory Rail: 1.25" 1-Slot MIL-STD-1913
- Grip: Wrap-Around Aggressive Texturing
- Trigger: Single-Action with Restrike Capability
- Trigger Pull: 4-lbs. 10-oz. (As Tested)
- Safeties: Left Side Manual, Firing Pin Block, Trigger Safety
- Magazine Release: Reversible
- Overall Length: 6.30"
- Height: 5.10"
- Slide Width: 1.00" to 1.05"
- Grip Width: 1.10"
- Weight: 21.9-oz.